TBT-0615 Asphalt Paraffin (Wax) Content Tester

• Heating Power: 700 W
• Cooling Power: 1000 W
• Rotation Speed of Stirring Motor: 1200 Rpm
• Transport Package: Standard Exporting Packing
• Specification: ISO
• Trademark: TBT
• Model NO.: TBT-0615
• Origin: Nanjing China
• HS Code: 90158790
• Production Capacity: 50sets/Month

Product Description

TBT-0615 Asphalt Paraffin (Wax) Content Tester
Summary
This instrument is designed and made as per standards T 0615-2011 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by cracking distillation.
 
I. Main technical features

• This instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part is the cooling filter
• The special designed air flow distributor and hook for sample vessel make the instrument more reasonable and convenient for use.
• The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the observation window. Convenient to observe.
• This instrument equips a high accuracy digital temperature controller with clear temperature show and simple temperature set.
• This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.

 
II. Main technical specifications
1. Power supply:     AC(220±10%)V,50Hz.
2. Heating power:    700W.
3. Cooling power:    1000W.
4. Stirring rate of motor:    1200 r/min.
5. Temperature sensor:      Pt100.
6. Refrigeration medium:    F22.
7. Temperature accuracy:    ±0.1ºC.
8. Working environment:    -30ºC~40ºC,RH<85.
9. Total power consumption: ≤1800W.
10.Overall dimension:      620mm×500mm×1600mm
                          (The air flow distributor is included)
 
III. Optional accessories
1.Vacuum pump:     Model 2XZ-2L/S(Recommend)
2.Vacuum drying oven:Model DZF-6020(Recommend)
3. Burning furnace:   Model SYD-0615-1 Cracking furnace(Recomend)
4. Balance:          0.1mg ,0.1g one set for each
IV. Standard accessories

No.	Item	Unit	Qty
1	Cooling and filtering device (including suction flask, sand core filter funnel, sample cooling tube, glass tube, glass rod, etc.)	Set	3
2	Pyrolysis flask (With a handle)	Piece	3
3	Sample tube (90 ml)	Piece	3
4	Mercury thermometer (-30 ºC~+50 ºC, scale division is 0.5ºC)	Piece	1
5	Dustproof cover (3 large and 3 small)	Piece	Total 6
6	Conical flask (250×24)	Piece	5
7	Stopper for thermometer (Large)	Piece	1
8	Silica gel tube (outer diameter Ф9×wall thickness1.5; length 400 mm)	Piece	3
9	Silica gel stopper (5#: 2 pieces, 6#( Improved.): 2 pieces)	Piece	Total 4
10	Beaker (1000 ml)	piece	1
11	Graduated flask (100 ml)	Piece	1
12	Stopping ring for thermometer (1#)	Piece	4
13	"O" type rubber ring (Ф31×2.4)	Piece	3
14	Fuse 15 A (Ф6×30)	Piece	3
15	Power supply wire(Homemade)	Piece	1
16	Pneumatic distributor(Including installation frame, must install it by user self)	Set	1
17	Sample container hook holder	Piece	1
18	Wax filter bottle(250 mL)	Piece	3
19	Three way component(One into two out, with two-way valves)	Piece	1
20	Transition joints(Φ12.7 turn Φ10)	Piece	1
21	Rubber tube (outer diameter Ф14×wall thickness3.5)( According to the user's need to cut the tube)	Meter	8
22	Silica gel tube (outer diameter Ф18×wall thickness3.0) ( Connecting transition joints and vacuum drying box)	Centimeter	8