TBTUVA-263 ASTM D4329 Rubber Accelerated Weathering UV Aging Test Chamber

• Customization: Available
• After-sales Service: yes
• Warranty: one-year
• Model NO.: TBTUVA-263
• Temp. deviation: +-3.0 degree
• Humidity range: not less than 93%R.H (not adjustable)
• Distance between lamps: 70mm
• Distance between samples and lamps: 100 mm ~ 350 mm adjustable
• Transport Package: Standard Export Packing
• Specification: ISO
• Trademark: TBT
• Origin: Jiangsu China
• HS Code: 90158790
• Production Capacity: 50sets/Month

Product Description

Rubber Accelerated Weathering UV Aging Test Chamber
Model:TBTUVA-263
 

 

Product Description

The UV Accelerated weathering test chamber (UV aging test chamber) stimulates dew and rain with consideration for humidity and/or water spray equipped with a fluorescent UV lamp which can completely simulate the UV spectra of sunlight, and exposes materials to alternating cycles of UV light and moisture at controlled. It's most widely used for weathering test for types of damages include color change, gloss loss, chalking, cracking, crazing, hazing, blistering, strength loss and oxidation. It adopts 8 pieces of UV lamps (40W) as the light source. The lamps are distributed on the two sides inside the chamber, 4 pieces for each side.
 

Product Parameters

Introduction
Name	UV aging test chamber
Model	TBTUVA-263
Specimen Limited	Do not test explosive substances, flammable substances, and materials containing the above substances as samples. Otherwise, there is a danger of explosion, fire and other accidents. Do not allow corrosive substances to enter the water tank or chamber, which may cause the corrosion resistance of the product to decrease significantly. Do not use living things and substances that will exceed the allowable calorific value as samples.
Size & specification
Interior size	24 sets of fixtures (size: L280xW75mm), for 48PCS samples placed in total. Calibration hole is available if required.
Exterior size	1300×1560×600 mm appr. (WHD)
Weight	140 kgs appr.
2.4 Sample	The sample placement test space is no more than three-quarters of the total space, and there is no heat load.
Performance
Temp. control	PID self-adjustment SSR control
Irradiation temp. range	RT+10ºC ~ 70ºC (adjustable)
Condensing temp. range	RT+10ºC ~ 70ºC (adjustable)
Temp. deviation	±3.0ºC
Temp. resolution	0.1ºC
Temp. fluctuation	±0.5ºC
Tempe. uniformity	±3.0ºC
Humidity range	≥93%R.H (not adjustable)
Distance between lamps	70 mm
Distance between samples and lamps	100 mm ~ 350 mm adjustable
Irradiation range	0.35 W/m^2 ~ 1.0 W/m^2 adjustable
Irradiation lighting tube	Q-lab Lamp UVA-340 (other lamps UVB-313, UVA-351 is optional), L=1200/40 W, Φ 38 mm, 8pcs (average service life: 1600 hrs) China brand is optional.
Function mode	Irradiation mode, condensation mode and spray mode can be operated alternately.
The above temperature and humidity performance is measured under the condition of ambient temperature 25ºC±3ºC, relative humidity ≤85% no-load and no sample.
Irradiance probe (optional to purchase)	2pc / 4pc, Monitoring the real-time irradiance
Structure & Material
Inner material	SUS#304 stainless steel
External material	Painted shell or SUS#304 stainless steel
Duct circulation	Centrifugal circulation motor
Door and lock	Door handle lock, left door
Control panel	LCD 7-inch touch screen controller, with programmable temp., humid., UV(sun), and time and Fix mode of 2 running modes. USB interface (Download historical data and historical curves as Excel and JPG) Power switch button Run Indicator Water auto-supply button "Water Inlet" Alarm indicator
Power cord	The back of the device is equipped with a drain outlet and a national standard 2.5m long cable.
Control System
Control mode	Program: 50/100 groups of programs, each group of programs with 50/100 segments, can set the whole cycle of the program, part of the cycle, program connection, set the program end action, standby action. Fix-time (Constant): The running time and running conditions can be set.
Features	7-inch human-machine interface touch screen (English/Chinese language switchable) The software is independently developed by Sailham and has a software copyright registration certificate. (Strong scalability, non-standard custom software can be modified as required) Flat design, easy to operate
Sensor	PT100 three-wire high-precision sensor
Analog output	Voltage pulse (SSR) 2 points, DC 24V, minimum pulse width 5ms.
Spray System
Using the manual control function of the controller, to observe the spray condition in the open-door state, so as to adjust or replace the nozzle; The machine is equipped with a sprinkler, the sprinkler simulates the rain erosion during the rain, with a total of several nozzles, sprayed evenly. The spray time is set by the user; Inner water level is with automatic water replenishing.
Light source system
Types of light source (simulate the UV light in sunlight) Light source: 8 UV fluorescent lamps with rated power of 40W, UVA-340 (user can choose other lamps). Like other lamps, the aging of the UV lamps causes the lamp output to drop, and the UV without the Irradiance meter control system uses the rotational position method to compensate. This system can be used for many application standards, but it has inherent limitations. This method of changing position does not compensate for the effects of different batches of lamps or the surrounding environment.        Fig. - Lamp replacement method. UVA-340: A wavelength that emits sunlight from 365 nm to 295 nm, and its radiation peak is at 340 nm. UVA-340 is especially useful for control tests in different tests, with the best simulation of sunlight in the short-wave UV range.           UVB-313: The wavelength range is between 280 nm and 315 nm. UVB-313 ages faster than UVA-340 lamps, but their shorter wavelengths than the sun cutoff point can have unrealistic results for many materials.
Heating system
High speed heating tube of U-shape titanium alloy; Independent temperature control system and lighting system; Temp. control and output power controlled by micro computer with high accuracy and high efficiency. Thermal protection function of heating system. The black panel adopts the colorful touch screen controller or digital key pressing controller to control the heating process. PID self-regulation, monitoring all adopt the standard PT100 temp. sensor of black panel. Temp. of water tank adopts the colorful touch screen program to control the heating, water tank locates at the bottom of tank, there is electrical heating device. During the test process, there's test phase is dark condensation which need to generate saturated steam of high temperature, when steam meet the cool temperature, it condenses into water on its surface.
Safety protection device
Heating and humidifying over temperature protection Overload short circuit leakage protection Motor overheating protection Water shortage protection
Quality assurance system We strictly follows the requirements of ISO 9001:2015 quality management system and European CE product certification.
Standard accessories attached to machine
Stainless steel SUS # 304 Shelf layer 1pc Power cord 1pc 8 pieces of lighting tube installed in the equipment Operation and maintenance instructions 1 copy Controller manual 1 copy Warranty card 1 copy
Equipment ambient environment
Equipment placement		The ground is level and well ventilated No strong vibration around the device No strong electromagnetic fields around the device No flammable, explosive, corrosive substances and dust around the equipment Appropriate space for use and maintenance should be reserved around the equipment, as shown in the following figure: A: not less than 10cm B: not less than 60cm C: not less than 60cm D: not less than 150cm
Ambient environment		Temperature: 5ºC~35ºC Relative humidity: ≤85% Air pressure: 86kPa~106kPa
Power supply source		Voltage: AC220V±10%, Frequency: 50HZ (customization for 60Hz is available), Grounding resistance of protective ground wire is less than 4Ω The user configures an air or power switch of the corresponding capacity for the equipment, and this switch must be used independently for the equipment (not to be connected to a socket) Installed power: 4.5KW Maximum current: 20A
Condensate spray water		Bottled drinking water or distilled water, not unfiltered tap water;
Standard accessories attached to machine
Stainless steel SUS # 304 Shelf layer, Qty: 1 piece Power cord, Qty: 1 piece 8 pieces of lighting tube installed in the equipment Operation and maintenance instructions + warranty card, 1 copy

 

Customer Visit

 

Business Scope

Packaging

Clients Feedbacks

 

FAQ

1. How long is the delivery time?
Normally goods will be shipped out within 7-10days after contract signed and down payment received.

2. Is it possible to make our own brand/logo on your product?
Yes, but depends on MOQ.

3. What's your MOQ?
This depends on different types of products. If it is a large machine, the MOQ is usually 1 set. For small instruments, such as thermometers, the MOQ is 50 pieces.

4. What kind of payment term you accept?
Normally,
1) If total contract value less than USD 10,000.00 : 100% T/T in advance after contract signed.
2) If total contract value more than USD 10000.00 : 50% T/T in advance after contract signed and 50% T/T after receipt of BL copy. Or, irrevocable LC is acceptable.