TBTXBJ-500/1000 Concrete Creep Testing Rig
1. Usage Scope
Concrete Creep Testing Machine is designed to determine of concrete cylinder and cuboid parts under constant pressure load over time, ie, the creep deformation of concrete. It is applicable for concrete creep deformation test under single-direction pressure at constant temperature in a humid-free environment; The design and manufacture of this equipment in accordance with water sector standard SL352-2006 and national industry standard and it is able to meet the requirement the requirement of concrete creep deformation test performed by design, construction and quality inspection departments of scientific research institutions of relevant industries, universities and colleges;
2. Technical parameters
| 1. Maximum Testing Force |
500KN / 1000KN |
| 2. Measurement Range |
0-500KN / 0-1000KN |
| 3. Relative reading error |
±1% |
| 4. Spring Height |
300mm |
| 5. Spring Compression Stroke |
52mm |
| 6. Maximum Distance Between Upper Platen and Lower Platen (Compression space) |
1500mm |
| 7. Power Supply |
220V |
3. Product features
(1) After the pressure of this test machine is increased to rated level and the adjustable nuts are fixed, the digital instrument will indicate current pressure. In case the long time compression deformation pressure is low (less than rated pressure), the hydraulic system shall be manually operated to increase the pressure to rated level and to fasten the adjusting nuts;
4. System configuration
Creeping Testing Machine consists of main unit, hydraulic system, force measurement unit and compression deformation system, etc;
(1) Main unit consists of the upper platen, screw rod, middle compression platen, lower compression platen, adjustable nut, compression platen leveling plate assembly, folded spring etc. A Movable ball base is mounted between upper and lower platens; during operation, when the bottom surface of the upper compression platen touch (in contact with) the top surface of specimen, it can automatically adapt to the slight tilt in height direction of test piece (specimen), enabling the two platens contact in large area for uniform stress ; The upper compression platen will fall or rise automatically by rotating the adjusting nut according to the size of test piece so as to adapt to the test space. The top surface of upper and lower compression platen is carved with positioning frame for the convenience of placement of test piece at the center
(2) The hydraulic system
The hydraulic system consists of a hydraulic pump, oil pipe and separate (split) hydraulic jacks. The hydraulic system can control several creep test machine, The creep deformation test machine of which the pressure has been increase to rated level can be moved to another machine by adjusting the fixing nubs;
(3) The force measurement unit
The force measuring unit mainly consists of the compression sensors, connecting cable and high-precision digital display instrument.
5. The compression deformation system for creep testing machine
6. Packing List:
| Main Unit |
1 Pc |
| Pressure testing sensor |
1 Pc |
| Load Gauge |
1 Pc |
| Oil Pump |
1 Pc |
| Oil tank |
1 Pc |
| Instruction manual, certificate of quality |
1 Pc |
1. How long is the delivery time?
Normally goods will be shipped out within 7-10days after contract signed and down payment received.
2. Is it possible to make our own brand/logo on your product?
Yes, but depends on MOQ.
3. What's your MOQ?
This depends on different types of products. If it is a large machine, the MOQ is usually 1 set. For small instruments, such as thermometers, the MOQ is 50 pieces.
4. What kind of payment term you accept?
Normally,
1) If total contract value less than USD 10,000.00 : 100% T/T in advance after contract signed.
2) If total contract value more than USD 10000.00 : 50% T/T in advance after contract signed and 50% T/T after receipt of BL copy. Or, irrevocable LC is acceptable.
){kind=link}